Concasor cu ciocane GD1400

Concasorul cu ciocane GD are cea mai largă suprafaţă de concasare din acest domeniu, având o construcţie solidă, necesitând un grad redus de întreţinere, cu admisie specială pentru un separator de metal.

Concasor cu rotor

Concasorul cu rotor Van Aarsen este o maşină de rectificare fină, capabilă de transformarea granulelor de cauciuc în fărâme şi pudră de cauciuc în condiţii ambientale.

Granulator

Granulatorul este conceput pentru a reduce dimensiunea macrogranulelor până la 3,5mm, cu un motor eficient din punct de vedere al consumului, cu lanţ de distribuţie la rotorul granulatorului.

Main Grinder.

The second step in the VAN AARSEN RUBBER TECHNOLOGY process is the RTG 800 /1250 main grinder. Main Grinding is an ”ambient” mechanical process and is a grinding and not a cutting treatment. The tyre shreds are crushed between toothed rotor and stator tools. The shreds include the steel wires from the beads, which are of help during the grinding process. The toothed tools are grinding tools, hence they do not necessary need to be sharp. In just this single step the size of the shreds is reduced from (100*150 mm) to a granulate of 0-20 mm of which already 20 % is less then 2,0 mm due to the special design of the machine which is unique in the market. Another benefit of this unique design is that over 96 % of the steel is liberated during this process. The grinding temperature of approx. 80 degrees Celsius is maintained by adding process water in the main grinder. The water added into the man grinder evaporates during the grinding process and is cleaned in a wet-filter to remove the dust before it is released to the environment. The ground rubber with the liberated steel wires is transported via a vibration conveyor. The steel is separated from the rubber by several magnets. The separated clean steel is led via belt conveyors to containers outside the production building. The clean steel without rubber is ready for sales. The ground rubber and fiber mixture is pneumatically transported to the primary screening machine and separated in 3 different grades. In this example we take 0-2 mm, 2-4 mm and 4-20 mm. The fibers in the rubber are separated in the primary sieving machine and pneumatically transported to the central dust aspiration.

Maşină de rectificat principală

Într-o singură fază, maşina de rectificat principală macină grăunţele de cauciuc în granule din care 20% sunt deja 2,0 mm, eliberând 95% din oţel.

Tocător cu un singur rotor SRS1300

SRS1300 este un tocător cu un singur arbore, de mare capacitate, cu rotor interschimbabil şi cuţite de stator, cu utilizare operaţională optimă şi durată minimă de service.